3003 Aluminum Plate
Classification :
PRODUCT DETAILS
Product introduction
3003 aluminum plate is a type of aluminum alloy plate, belonging to the 3000 series of aluminum plates. It is mainly composed of elements such as Al and Mn, with an Al content of over 97%. Compared with 1060 pure aluminum plate, 3003 aluminum plate has a slightly lower aluminum content, but with the addition of a small amount of Mn element, it has better processing and mechanical properties.
3003 aluminum plate has good processing performance, corrosion resistance, and mechanical properties, so its application fields are wide. It is widely used in the fields of architecture, automobiles, machinery, packaging, etc., such as building structural components such as curtain walls, roofs, doors and windows, automotive components such as car bodies and engine hoods, industrial products such as mechanical parts and pipelines, as well as packaging materials such as packaging boxes and packaging boxes.
|
Product Name |
Aluminum Plate |
|
Category |
Pure aluminum plate, alloy aluminum plate, thin aluminum plate, medium thick aluminum plate, patterned aluminum plate |
|
Thickness |
0.15mm - 200mm |
|
Width |
500mm - 1500mm, customizable |
|
Material |
1050, 1060, 1070, 1010, 1011, 2A12, 3003, 3004, 3102, 5052,5083, 5754, 5A05, 5A02, 6060, 6061, 6063, 7003, 7009, 7075 |
|
Standard |
EN, GB, JIS, DIN, ASTM |
|
Characteristic |
Low density, high strength, good corrosion resistance, and excellent formability |
|
Aluminum Content |
Over 99.5% |
|
Delivery Status |
Annealing, hardening, solid solution, heat treatment |
|
Appearance |
Brushing, oxidation, mirror finish, embossing |
|
Application |
Rail transit, aerospace, automotive industry, ship transportation, medical equipment, chemical containers, electronics industry, etc |
| Minimum Order Quantity | 25Tons |
Chemical Composition
|
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Others: Each |
Others: Total |
Al: Min. |
|
1050 |
0.25 |
0.40 |
0.05 |
0.05 |
0.05 |
- |
0.05 |
0.03 |
0.03 |
- |
99.50 |
|
1060 |
0.25 |
0.35 |
0.05 |
0.03 |
0.03 |
- |
0.05 |
0.03 |
0.03 |
- |
99.60 |
|
1070 |
0.20 |
0.25 |
0.04 |
0.03 |
0.03 |
- |
0.04 |
0.03 |
0.05 |
- |
99.70 |
|
1100 |
0.95 Si Fee |
0.05~0.20 |
0.05 |
- |
- |
0.1 |
- |
0.05 |
0.15 |
99.0 |
|
|
2014 |
0.5~1.2 |
0.7 |
3.9~5.0 |
0.4~1.2 |
0.2~0.8 |
0.10 |
0.25 |
0.15 |
0.05 |
0.15 |
Margin |
|
2017 |
0.2~0.8 |
0.7 |
3.5~4.5 |
0.4~1.0 |
0.4~0.8 |
0.10 |
0.25 |
0.15 |
0.05 |
0.15 |
91.5 - 95.5 |
|
2024 |
0.50 |
0.50 |
3.8~4.9 |
0.3~0.9 |
1.2~1.8 |
0.10 |
0.25 |
0.15 |
0.05 |
0.15 |
Margin |
|
3003 |
0.60 |
0.70 |
0.05~0.20 |
1.0~1.5 |
- |
- |
0.10 |
- |
0.05 |
0.15 |
Margin |
|
3A21 |
0.60 |
0.70 |
0.20 |
1.0-1.6 |
0.05 |
- |
0.15 |
0.1-0.2 |
- |
- |
Margin |
|
3004 |
0.30 |
0.70 |
0.25 |
1.0~1.5 |
0.8~1.3 |
- |
0.25 |
- |
0.05 |
0.15 |
Margin |
|
3005 |
0.60 |
0.70 |
0.30 |
1.0~1.5 |
0.2~0.6 |
0.10 |
0.25 |
0.10 |
0.05 |
0.15 |
Margin |
|
3105 |
0.60 |
0.70 |
0.30 |
0.3~0.8 |
0.2~0.8 |
0.20 |
0.40 |
0.10 |
0.05 |
0.15 |
Margin |
|
5005 |
0.30 |
0.70 |
0.20 |
0.20 |
0.5~1.1 |
0.1 |
0.25 |
- |
0.05 |
0.15 |
Margin |
|
5052 |
0.25 |
0.40 |
0.10 |
0.10 |
2.2~2.8 |
0.15~0.35 |
0.10 |
- |
0.05 |
0.15 |
Margin |
|
5754 |
0.40 |
0.40 |
0.10 |
0.50 |
2.6~3.6 |
0.30 |
0.20 |
0.15 |
0.05 |
0.15 |
Margin |
|
5A05 |
0.50 |
0.50 |
0.10 |
0.3-0.6 |
4.8-5.5 |
- |
0.20 |
- |
0.05 |
0.05 |
Margin |
|
5083 |
0.40 |
0.40 |
0.10 |
0.4~1.0 |
4.0~4.9 |
0.05~0.25 |
0.25 |
0.15 |
0.05 |
0.15 |
Margin |
|
6061 |
0.40~0.8 |
0.70 |
0.15~0.4 |
0.15 |
0.8~1.2 |
0.04~0.35 |
0.25 |
0.15 |
0.05 |
0.15 |
Margin |
|
6082 |
0.70~1.3 |
0.50 |
0.10 |
0.4~1.0 |
0.6~1.2 |
0.25 |
0.20 |
0.10 |
0.05 |
0.15 |
Margin |
|
7075 |
0.40 |
0.50 |
1.2~2.0 |
0.30 |
2.1~2.9 |
0.18~0.28 |
5.1~6.1 |
0.20 |
0.05 |
0.15 |
Margin |
Mechanical Properties
|
Tensile Strength (MPa) |
Test Stress (MPa) |
Hardness HB |
Elongation Rate (%) |
|
95-135 |
≥ 35 |
28 |
10 |
Physical Performance
|
Density |
Melting Point |
Thermal Expansion |
Thermal Conductivity |
Resistivity |
|
2.73 Kg/m³ |
655 °C |
23.1(10 -6/℃) |
190 W/m.K |
0.034× 10-6Ω.m |
Annealing State
|
Brand |
Annealing State |
|
1xxx: 1050, 1050A, 1060, 1100 |
O, H12, H14, H16, H18, H22, H24, H26, H28, H111 |
|
3xxx: 3003, 3004, 3005, 3105 |
|
|
5xxx: 5005, 5052, 5754, 5083, 5086, 5182, 5049, 5251, 5454 |
O, H22, H24, H26, H28, H32, H34, H36, H38, H111 |
|
6xxx: 6061, 6082 |
T4, T6, T451, T651 |
|
2xxx: 2024 |
T3, T351, T4 |
|
7xxx: 7075 |
T6, T651 |
Scope of Application
|
Aluminum Uses And Application Area |
|
|
Food Packaging |
Beverage can ends, cans, bottle caps, etc. |
|
Building |
Curtain walls, cladding, suspended ceilings, thermal insulation, venetian blinds, etc. |
|
Transportation |
Auto parts, passenger car bodies, aviation ships and air cargo containers. |
|
Electronic Equipment |
Electrical appliances, communication equipment,PCPlate drilling guide, lighting and heat dissipation materials, etc. |
|
Consumer Goods |
Umbrellas, cooking utensils, sports equipment, etc |
|
Other |
Military, color coated aluminum plate |
Warehouse storage
Our company is a quality benchmark enterprise in Shandong Province, a national contract-abiding and credit-abiding enterprise, and a national, industry and group standard unit for "Colored Steel Plate for Building Decoration". We have many customers all over the world, and our products are exported to Asia, the Middle East, America, Europe, Africa and other countries, enjoying a good reputation at home and abroad. Up to now, we have also established long-term, win-win partnerships with a number of large steel mills.
Packing and delivery
We are the first-level agent for Chinese state-owned enterprises Shanghai Baosteel and Taigang Iron and Steel Group. Our products can meet every unique requirement of our customers. We provide customized services. We can support customers with quality inspections if needed. We can provide competitive prices, good quality control, purchasing suggestions. Welcome to inquire and order!
CERTIFICATE OF HONOR
OUR SERVICE
1 : Prime quality and reasonable price.
2 : Wide excellent experiences with after-sale service.
3 : Every process will be checked by responsible QC which insures every product's quality.
4 : Professional packing teams which keep every packing safely.
5 : Trial order can be done in one week.
6 : Samples can be provided as your requirements
FAQ
Q2:Does the product have quality inspection before loading?
A:Of course, all our products have undergone strict quality inspection before packing.
Q3:Can you provide the samples free?
Q4:What about product prices information?
A:Prices various according to periodic price changes of raw materials.
Q6:What is your terms of payment ?
RELATED PRODUCTS
GET A FREE QUOTE
CONTACT US
Tel : +86 15315022118
E-mail : manager4@wugangmetal.com
WhatsApp :+8615315022118
Add : Qingdao City, China
GET A FREE QUOTE
Copyright : Wugang Steel (Qingdao) Co., Ltd.